The only issue is when it’s mounted to a surface the menu isn’t accessible anymore and would have to use the Sidus Link app to make changes. I think Aputure had to decide to keep the size as close as possible to 1′ by not having the menu display on the front or make it fatter to put it on the end. The main menu is located on the back of the MT Pro with the on/off button on the end of the light. In 5600K, it performed even better with an extended CRI of 94.01. Overall the MT Pro in 3200K looks very good, with an extended CRI of 91.38. This is handy when mixing them in with other lights that might lean towards green or magenta. Since the MT Pro is a full-color fixture, it has the ability to fine-tune the output with +- Green. To get the best reading, I placed the meter right in front of the fixture to not have any light pollution. Below are the setting versus the readings. The MT Pro kelvin performance is very good as the accuracy is close to the kelvin settings. All tests were performed with a Sekonic C-700-U SpectroMaster at a distance of 1m /3.3′. Here are the Lux readings in the CCT and HSL settings. They will work better in lower lighting conditions where the colors will pop more. OutputĪt 7.5 watts, the MT Pro isn’t a powerhouse, but it is surprisingly bright and plenty bright as a background practical where high output isn’t needed. These tubes look great as hair lights as they are soft with enough output for a subtle scratch light.Īs with most tube lights, you can use a variety of clamps to get the light mounted. I’ve done this with the Quasar Science Q-Lion Linear Battery lights without issue but adding some tie-downs is a good idea. You don’t want it to come down on someone if the stands get kicked. You can also use the magnets on a steel arm and hang it overhead or on speed rail, but be careful. The magnets have a good amount of strength and will keep the light in place when mounted vertically. A 1/4 20″ tap on the end as well as on the bottom, plus on the back are two strong magnets. With so many output options, the battery life will vary. It takes approximately two hours for a full charge. You can use the MT Pro while it’s charging. The fixture is charged via the USB-C charging port on the end. With the built-in 15.5Wh lithium-polymer battery, the MT Pro can operate at maximum output for approximately 2 hours. Its housing is all metal, and the bezel is thin, which keeps the fixture fairly compact. You will need lighting design software for custom animations. If you do tabletop work, the 1′ size is more manageable, opening up a lot of possibilities for rich colors or as a key /fill using the CCT range of 2,000k to 10,000k.įor users who want precision pixel control for close-up or practical lighting effects, the MT Pro has 36 pixels that can be controllable via DMX and CRMX for customization. These same features, combined with its thin bezels, make the MT Pro ideal for on-camera practicals that can spice up a scene. Its compact size, magnets, and built-in battery allow it to be easily hidden and while tucked away, it can be controlled remotely using LumenRadio CRMX or direct Sidus Link App Control. Not to, say a couple won’t come in handy as they can be used as a fill or adding a splash of color to a scene. I like them, but they are not for everyone, and to get the most out of them, you will need several in different sizes. Tube lights are somewhat a niche specialty fixture. Included Carrying Case for Light Fixture, Tripod, and Grid.Two Pixel Chase, Three Pixel Chase, Rainbow, Pixel Fire.7 Built-In Pixel FX: Color Fade, Color Cycle, One Pixel Chase,.TV, Pulsing, Cop Car, Lightning, Party Lights.9 Built-In System FX: Fireworks, Fire, Paparazzi, Faulty Bulb,.19 DMX Profiles: High & Low-Density Pixel Controls.Save Up to 10 Custom FX and 10 Music FX for Quick.Supports SidusPro® FX, Including Manual FX, System FX,.Multiple Control Methods: Sidus Link Bluetooth App.Industry-standard X,Y (CIE 1931) & RGB Tunability.Advanced HSI with White Point CCT Control.>90% of Colors Within Rec.2020 Color Space. Built-In Lithium-polymer Battery (approx.Fully Tunable Green-Magenta Adjustment (Full Plus/Minus Green).Fully Tunable CCT from 2,000K to 10,000K.Industry-leading Pixel Density: 36 Pixels in 1 Foot.7.5W Output Pixel-Mappable RGBWW Mini Tube LED.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |